Microsquad Waka75 HD X1 – 75mm 1s HD Quad (DIY BUILD KIT)

Microsquad Waka75 HD X1 – 75mm 1s HD Quad (DIY BUILD KIT)

The Microsquad Waka75 HD X1, a light (30g dry) 1s HD whoop / quad for super HD FPV recordings! Waka75 HD X1 comes with the CrazybeeX F4 AIO 5-in-1 flight controller – build-in VTX, RX, ESC etc., Caddx Baby Turtle HD (Whoop), UniBell 0802 motors and the upgraded V4 frame. The new Microsquad UniBell 0802 engines now with an improved bell and even better performance and power!

Features
• 30g (dry) 1s 75mm HD Brushless Quad
• UniBell 0802 Motoren (19000kv 1s) mit 2-Blatt Props – Powerful and smoothly
• CrazybeeX F4 5in1 V2.2 AIO Flight controller 1s Lipo kompatibel
• Caddx Baby Turtle HD (Whoop)
• Betaflight OSD support, easy to get RSSI, Voltage, current on your goggles
• Camera Angle adjustable
• Smartaudio ready, change VTX bands, powers, channels via OSD
• Receiver option : FrSky, FlySky, PNP
• Compatible both for 1s Lipo / LIHV

Specifications
• Item Name: Microsquad Waka75 HD X1 – 75mm 1s HD Quad
• Wheelbase: 75mm
• Gewicht: ca. 30g (without battery)
• Recommended Battery: 1x 1S 520mah

ESC
• MCU upgraded to EFM8BB21
• Power supply: 1S LiPo/ LiPo HV
• Current: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: O_H_5_REV16_8.HEX
• Default protocol: DSHOT600

Receiver
Onboard Frsky SPI D8 receiver Version
• SPI BUS receiver Frsky D8 compatible
• Compatible Non EU transmitter D8 Channels: 8ch
• Failsafe support
• No ground interference (Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky SPI receiver Version
• SPI BUS receiver
• Protocol: AFHDS and AFHDS-2A Switchable
• Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
• No ground interference (Transmitter and receiver 1 m from the ground): 200~300m
• Failsafe support

Onboard 5.8g VTX
• Output power: 25mw~200mw switchable
• Frequency: 40CH
• Input voltage: 3.3V~5.5V
• Current consumption: 300mA(type)
• Frequency: 5.8GHz 5bands 40 channels (include Race band)
• Smartaudio ready

Caddx Baby Turtle HD (Whoop)
• Image sensor: 1/2.7Inch -CMOS sensor
• Resolution: 800TVL
• Recording: 1080P/60fps, 1080P/30fps
• Lens: 1.8mm lens
• FPC FOV/Recording FOV: 170
• TV system: NTSC/PAL changeable with OSD
• Video file format: MP4
• Aspect ration: 16:9/4:3 Changeable with OSD
• Max Micro SD card supported: 64G
• Audio: Support
• Illumination: 0.01Lux
• DNR: 3DNR
• WDR: YES
• Fly OSD: YES
• Color: Black/White
• Power input: 5V-20V
• Power current: 12V/160MA
• Net weight: 9g
• Dimension: 14*14 & 19*19mm
• Dimension of mounting holes: 20*20mm (Normal Version)/ 25*25mm (Whoop Version)

Motors
• SCHUBKRAFT UniBell 0802 KV19000
• Configuration:9N12P
• Stator Diameter: 8mm
• Stator Length: 2mm
• Shaft Diameter: Φ1mm
• Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
• Weight(g):1.7g
• No.of Cells(Lipo):1S

Props
• 40mm 2-Blade – 1mm 

Weight (without battery) : 30g
Weight (with battery) : 43g (mit GNB 1s HV 520mah Lipo)

Included
• 1 x Microsquad Waka75 HD X1 (DIY BUILD KIT)
• 1 x USB Charger
• 1 x Screwdriver and Proptool

Required:
• Transmitter
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad 1S 450-550mAh HV Lipo with a high C rate

* Attention
The video transmitter may spark on non-harmonized frequencies which may not be used in Germany and the EU. § 55 of the Telecommunications Act (TKG) prescribes the following frequencies for use: 5725 to 5875 MHz. The device may only be operated in this frequency range with a power of 25mW. The use of unauthorized frequencies and higher performance constitutes a misdemeanor. In the delivery state the device is in DE and EU allowed 5740 MHz (band F, channel 1) with a power of 25mW.