Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT)

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT) - Image 2

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT) - Image 3

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT) - Image 4

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT) - Image 5

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT) - Image 6

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT) - Image 8

Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT)

Name: Microsquad 75mm X2 Deluxe Brushless 2S with built-in Receiver (DIY BUILD KIT)
SKU: 75mm-deluxe-brushless-x2
Availability: InStock

139,95 €

keine Ausweisung der Mehrwertsteuer gemäß § 19 UStG + Versandkosten

A new era of Micro Brushless Whoops!
Available now!

Build-In Empfänger

Auswahl zurücksetzen

Artikelnummer: 75mm-deluxe-brushless-x2 Kategorien: KIT + BNF + RTF, Micro Brushless Schlüsselworte: 0802, 16000kv, 1s, 2s, 75mm, acro, cam, cmos, deluxe, deluxe edition, drone, flyingfolk, fpv, freestyle, frsky, hobby, horizon, hv, indoor, inductrix, micro, microsquad, mini, mm, outdoor, quadcopter, race, racing, schubkraft, schubwhoop, tiny, vtx, whoop

Microsquad 75mm X2 Deluxe Brushless 2S Racer with built-in Receiver (DIY BUILD KIT)

Now as a 1-2s Deluxe PowerWhoop – the Microsquad 75mm X2 Deluxe . The special feature is that the Microsquad X2 Deluxe can be flown with 2s and 1s Lipo! That means it can continue to be used the 1s Lipos! Furthermore Lipo mounts for 250-300mah and 450-550mah Lipos are included. So you are extremely flexible and can easily adapt your Microsquad to the situation – indoor as well as outdoor! The Deluxe Edition comes with an aluminum / carbon frame and the coveted Microsquad Race Canopy which is not only a feast for the eyes, but also stable!

Specs
• Flightcontroller: CRAZYBEEF3 PRO Firmware target: CrazybeeF3
• MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
• Sensor: MPU-6000 (SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 1-2S battery input (DC 3.5-8.7V)
• Built-in 5A (each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in SPI Frsky, FlySky, DSM2 / DSMX receiver with telemetry• Built-in Betaflight OSD(SPI Control)
• Built-in Current meter Max 28A
• Current meter scale set to 1175
• Built-in 5V 1A Buck / Boost with LC filter
• Built-in voltage detection
• BLHELI_S pass-through Ready
• Heading LED Ready

ESC
• MCU upgraded to EFM8BB21
• Power supply: 1-2S LiPo / LiPo HV (3.5v / 8.7v)
• Current: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: S_H_50_REV16_7.Hex
• Default protocol: DSHOT600

Receiver
• SPI BUS receiver
• Compatible FrSky, FlySky, DSM2 / DSMX
• Channels: 8ch / 16ch (depends on protocol)
• Failsafe support
• No ground interference ( Transmitting and receiving 1 m from the ground): 300m
• *external receiver can also be connected!

Canopy with Camera/VTx
• Input Voltage: 3.3V – 5.5V
• Camera Resolution: 800TVL
• Field of View: 150°
• Video Format: NTSC
• Power: 25mw
• Weight: 4,45g
• super easy switching between channels!

Motors
• SCHUBKRAFT 0802 KV16000
• Configuration:9N12P
• Stator Diamter: 8mm
• Stator Length: 2mm
• Shaft Diameter: Φ1mm
• Motor Dimension(Dia.*Len):Φ10.5mm*14.5mm
• Weight(g):1.8g
• No.of Cells(Lipo):1S-2S

Props
• Microsquad 40mm Triblade – orange

Weight (without LiPo) : 28g
Weight (with 2x 1s LiPo) : 41g

Included:
• 1 x SCHUBKRAFT Microsquad 75mm X2 Deluxe Brushless 2S Racer (DIY BUILD KIT)
• 1 x USB Charger
• 1 x Screwdriver and Proptool
• 1 x SCHUBKRAFT Stickersheet ( High-tech with transfer sheet)

Required:
• Transmitter
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad 1S 300-550mAh HV Lipo (2x for 2s!) with a high C rate