microsquad-StartUp75-flight-hero-los-whoop-1s-75mm-brushless-race-freestyle-tiny-drone-16

microsquad-StartUp75-flight-hero-los-whoop-1s-75mm-brushless-race-freestyle-tiny-drone-3

Microsquad StartUp75 | Flight Hero – Starter Kit für Einsteiger (DIY BUILD KIT)

Name: Microsquad StartUp75 | Flight Hero - Starter Kit für Einsteiger (DIY BUILD KIT)
SKU: MS-StartUp75
Price: 79.95 EUR
Availability: InStock

79,95 €

keine Ausweisung der Mehrwertsteuer gemäß § 19 UStG + Versandkosten

The perfect entry-level brushless whoops! No soldering necessary! Without FPV for easy learning to fly – at a reasonable price!

Build-In Empfänger	Auswahl zurücksetzen

Artikelnummer: MS-StartUp75 Kategorien: KIT + BNF + RTF, Micro Brushless Schlüsselworte: 1s, 75, 75mm, anfänger, beginner, budget, crazybee, drone, dsm2, dsmx, einsteiger, f3, flight hero, flysky, fpv, freestyle, frsky, hobby, hv, learn, learning, line-of-sight, los, micro, microsquad, mini, noFPV, quadcopter, racing, schubkraft, schubwhoop, starter, tiny, whoop

Microsquad StartUp75 | Flight Hero – Starter Kit for Beginners (DIY BUILD KIT)

Beginners welcome! The Microsquad StartUp75 is the perfect beginner brushless whoop with receiver without FPV (LOS – Line of Sight / fly on sight) at a great budget price to learn to fly!

No soldering necessary! Simply put together and screw – done!

Why do we offer this whoop? Quite simply: everyone has started with this sport or hobby! Even if our whoops are often easy to fly, this should usually be practiced first. Most pilots first try out the LOS (Line of Sight – on sight without FPV) before switching to an FPV system or expanding it. It’s an advantage if you’re good at it, as there are occasional situations where you just have to fly without FPV. In addition, you already have a much better feeling for the drone before you fly FPV. Less built-in technology also means fewer parts that can break in a crash. This is especially important for beginners, because crashes will happen 100% – with everyone! 🙂 Here it is very important to say that all installed parts are available from us as spare parts – who would want to wait forever! You can also expand this kit for FPV at any time – we have all the necessary components here.

This starter kit for beginners includes everything needed to build this whoop. Very easily! On request even without having to solder once (note when ordering). Screwdriver, Proptool and USB charger for charging our 1s batteries are already included. So it can start immediately!

How to learn:

how to easily build a whoop
bind it to the remote control
hires him to adapt them to his needs
and of course flies – which is a lot of fun!

All you need is:

a remote control (which supports FrSky, FlySky or Spektrum/DSMX)
some batteries (preferably GNB 520mah 1s from our shop) – charger is already included in this KIT!

We’re here for you!

Even if everything doesn’t go as it should, no problem, we’re happy to help! We help with assembly instructions, technical questions and any other kind of support. After all, we are happy to have you – our new customer and hopefully soon friend!

Here are some technical details about the components in this kit, which shouldn’t be that interesting for beginners 🙂

Specs
• Flightcontroller: CrazyBee F3 with built-in Receiver
• Betaflight target: CRAZYBEEF3
• MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
• Sensor: MPU-6000(SPI connection)
• Power supply: 1S battery input (DC 3.5-4.35V)
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Frsky, FlySky, DSM2 / DSMX receiver with telemetry
• Built-in Betaflight OSD(SPI Controll)
• Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
• Built-in 5V 0.8A BEC with LC filter
• Built-in voltage detection
• BLHELI_S pass-through Ready
• Heading LED
• size: 29 x 29mm
• weight: 3.5g

ESC
• Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
• Current: 5A continuous peak 8A (3 seconds)
• Supports BLHeliSuite programming
• Factory firmware: O_L_5_REV16_6.HEX
• Motor connector: JST PH1.25 3pin
• Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM

Receiver
• SPI BUS receiver
• Option Frsky, FlySky, DSM2 / DSMX
• Channels: 8ch / 16ch (depends on protocol)
• Failsafe support
• No ground interference ( Transmitting and receiving 1 m from the ground): 300m
• *external receiver can also be connected!

Motors
• SCHUBKRAFT Microsquad 0703 20000kV

Props
• Microsquad 40mm Triblade

Weight (without LiPo) : 21g

Included
• 1 x Microsquad StartUp75 | Flight Hero – Starter Kit für Einsteiger (DIY BUILD KIT)
• 1 x USB Charger
• 1 x Screwdriver and Proptool

Required:
• Transmitter
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad 1S 300-550mAh HV Lipo with a high C rate

Weight	0.1 kg
Dimensions	5 × 2 × 1 cm
Build-In Empfänger	FrSky, FlySky, DSM2 / DSMX

Reviews

There are no reviews yet.

Be the first to review “Microsquad StartUp75 | Flight Hero – Starter Kit für Einsteiger (DIY BUILD KIT)” Cancel reply

You must be logged in to post a review.

Microsquad StartUp75 | Flight Hero – Starter Kit für Einsteiger (DIY BUILD KIT)

Reviews

Be the first to review “Microsquad StartUp75 | Flight Hero – Starter Kit für Einsteiger (DIY BUILD KIT)” Cancel reply

Related products

Login

Register