Microsquad Mantodea I – F4 15A Brushless 2-3S with 1102 Motors (DIY BUILD KIT)

Microsquad Mantodea I – F4 15A Brushless 2-3S with 1102 Motors (DIY BUILD KIT)

Here he is! The new rocket from Microsquad! Latest built-in hardware and extremely good looks.

Together with the latest Microsquad F4 15A AIO FC, the Microsquad 1102 (9000kv) engines and the super good optics and quality of the frame, you’ll get an awesome rocket that will blow you away!

Montodea Frame
• Microsquad Mantodea 115mm (Motor to Motor)
• ultra stable, made of high quality carbon
• smooth finish on all edges
• super light: 6.9g (Canopy 1.9g)
• many FC mounting options (Whoop Style FC with USB downside + 20x20mm + 16x16mm)
• stylish canopy with Nano Cam adapter (12 / 13mm like: Caddx EOS and 19mm support)

Specs FC
Die neuste Generation der Flugsteuerungen! Leicht (nur 3,9g) und extrem Leistungsstark! Der neue Microsquad F4 FC mit 15A und 4s (auch HV!) Unterstützung ist da. Er passt perfekt für Brushless Whoops. Super leicht mit integrierten Betaflight MATEKF411 Prozessor FC, Betaflight OSD, Build-in 5V 2,5A BEC (mit LC Filter) und 2-4S HV 15A ESC (echte 4S HV Unterstützung!). As a receiver, we recommend our Nano RX series.
• CPU: STM32F411CEU6 (100MHZ )
• Six-Axis: MPU6000 (SPI connection)
• Größe: 28,5mm x 28,5mm, whoop mounting pattern
• Firmware: Betaflight MATEKF411 (MK41)
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
• Receiver support: Support Frsky XM/XM+/R9M / Futaba / Flysky / TBS Crossfire / DSM2/X
• Invert und non-Invert S-BUS Port
• SmartAudio ready
• Support programmable LED like WS2812 etc
• Buzzer support
• Built-in current sensor
• Weight: 3.9g

ESC
• Support BLheli/BLHELI_S suite Pass-through ready
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Input voltage: 2S-4S HV Lipo
• Current/Peak: 15A
• Firmware: BLHELI_S
• Motor Connectors: 1.25mm header pins connectorn (comes with package but not soldered)

Manual you can find here

Receiver
As a receiver, we recommend our Nano RX series

Caddx EOS2 Kamera (custom)
• ready with Molex plug for easy VTx plug ’n play
• Input Voltage: 3.3V – 6V
• Camera Resolution: 1200TVL
• Camera Sensor: 1/3 “ CMOS
• Lense: 2.1mm, FOV 160 °
• D-WDR, 2 DNR, 0.001Lux @ F1.2
• Rolling Shutter
• Latency: ca. 3ms
• Video Format: PAL 4:3
• Power: 25mw 300 ~ 350mA bei 5V DCIN
• Size: 14 x 14 x 16.0mm
• Weight: 5g

VTx with 25/200mW* and 40 Kanal (incl. Raceband)
• Input Voltage: 3.3V – 5.5V
• Stromaufnahme: 300mA
• Frequency: 5,8GHz 5 Band 40 Kanal inkl. Raceband
• UFL Antenna
• SmartAudio support
• Weight: ca. 2g (without Antenna)

or alternatively with Diamond Whoop VTx DVR

Motors
• SCHUBKRAFT 1102 KV9000
• Shaft: 1mm
• Motor mounting: M1.4 on Dia 6.6mm
• Plugs: Micro JST-1.25 3-pin
• Weight: ca 2.9g
• longer Cable: 5cm (without plug)
• Color: red/black

Props
• Microsquad 65mm 1.0mm – clear black

Weight (without LiPo) : ca. 39g

Included
• 1 x Microsquad Mantodea I (DIY BUILD KIT)
• 1 x Screwdriver and Proptool

Required:
• Transmitter / Receiver
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad or GNB 2S 300-520mAh Lipo with a high C rate

* Attention
The video transmitter may spark on non-harmonized frequencies which may not be used in Germany and the EU. § 55 of the Telecommunications Act (TKG) prescribes the following frequencies for use: 5725 to 5875 MHz. The device may only be operated in this frequency range with a power of 25mW. The use of unauthorized frequencies and higher performance constitutes a misdemeanor. In the delivery state the device is in DE and EU allowed 5740 MHz (band F, channel 1) with a power of 25mW.