Microsquad Phoenix Park Racer 1103 – streched X

Microsquad Phoenix Park Racer 1103 – streched X

If you want a brute racing / freestyle whoop that flies like a big 5 „but weighs only 37g, then you’ve come to the right place! The frame is milled from 2mm carbon fiber facing and also has 2 struts that not only make the frame stiffer and more durable, but also protect your electronics in the crash. Together with the Microsquad 1103 (11000kv) engines, 65mm Props and Crazybee F4 2s FC you will get a madness 2s rocket that will blow you away! Frame Designed by Phoenix_FPV (Alex Hagen)

Specs

• Flightcontroller: CRAZYBEE F4 PRO Firmware target: CrazybeeF4
• MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000 (SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 1-2S battery input (DC 3.5-8.7V)
• Built-in 5A (each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in SPI Frsky, FlySky, DSM2 / DSMX receiver with telemetry
• Built-in Betaflight OSD (SPI Control)
• Built-in Current meter Max 28A
• Current meter scale set to 1175
• Built-in 5V 1A Buck / Boost with LC filter
• Built-in voltage detection
• BLHELI_S pass-through Ready
• Multi Serial port support
• Heading LED Ready
• Weight: ca. 4,2g

ESC
• MCU upgraded to EFM8BB21
• Power supply: 1-2S LiPo / LiPo HV (3.5v / 8.7v)
• Current: 5A continuous peak 6A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: S_H_50_REV16_7.Hex
• Default protocol: Dshot150 / Dshot300 / Dshot600 / Oneshot125 / Multishot / PWM
• Motor plug: JST PH1.25 3-pole

Frame:
• Motor to Motor: 107mm (65mm props)
• Motor mounts: 9mm – 4 hole and 5mm – 3 hole
• FC / ESC mounting: 16mm and 35mm
• Material: Carbon
• Weight: ca. 7,65g
• Color: carbon

Receiver
• SPI BUS receiver
• Compatible FrSky, FlySky, DSM2 / DSMX
• Channels: 8ch / 16ch (depends on protocol)
• Failsafe support
• No ground interference ( Transmitting and receiving 1 m from the ground): 300m
• *external receiver can also be connected!

Caddx EOS2 Kamera (custom)
• ready with Molex plug for easy VTx plug ’n play
• Input Voltage: 3.3V – 6V
• Camera Resolution: 1200TVL
• Camera Sensor: 1/3 “ CMOS
• Lense: 2.1mm, FOV 160 °
• D-WDR, 2 DNR, 0.001Lux @ F1.2
• Rolling Shutter
• Latency: ca. 3ms
• Video Format: PAL 4:3
• Power: 25mw 300 ~ 350mA bei 5V DCIN
• Size: 14 x 14 x 16.0mm
• Weight: 5g

VTx with 25/200mW* and 40 Kanal (incl. Raceband)
• Input Voltage: 3.3V – 5.5V
• Stromaufnahme: 300mA
• Frequency: 5,8GHz 5 Band 40 Kanal inkl. Raceband
• UFL Antenna
• SmartAudio support
• Weight: ca. 2g (without Antenna)

Motors
• SCHUBKRAFT 1103 KV11000
• Shaft Diameter: Φ1,5mm
• Motor mounting: M1.6 on Dia 8.5mm
• Plugs: Micro JST-1.25 3-pin
• Weight: ca. 3.2g
• No.of Cells(Lipo): 2s-3s

Props
• Microsquad 65mm Twoblade 1.0/1.5mm – black

Weight (without LiPo) : ca. 37g

Included
• 1 x Microsquad Phoenix Park Racer (streched X) with built-in Receiver (DIY BUILD KIT)
• 1 x USB Charger
• 1 x Screwdriver and Proptool

Required:
• XT30 Socket cable if you prefer (available in our Shop) – Ph2 2s is included into the KIT
• Transmitter
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad 1S 300mAh HV Lipo with a high C rate

* Attention
The video transmitter may spark on non-harmonized frequencies which may not be used in Germany and the EU. § 55 of the Telecommunications Act (TKG) prescribes the following frequencies for use: 5725 to 5875 MHz. The device may only be operated in this frequency range with a power of 25mW. The use of unauthorized frequencies and higher performance constitutes a misdemeanor. In the delivery state the device is in DE and EU allowed 5740 MHz (band F, channel 1) with a power of 25mW.