LarvaX – Squad Power Edition (DIY BUILD KIT)
139,00 €
keine Ausweisung der Mehrwertsteuer gemäß § 19 UStG + Versandkosten
Super powerful 1202.5 UniBell motors and FPV video recording
LarvaX – Squad Power Edition | 2-3S 2.5″ DVR FPV Video Recording – (DIY BUILD KIT)
The popular LarvaX Squad Power Edition: now with super powerful 1202.5 UniBell motors – optionally with 8000kv (2s) or 6400kv 3s. Plus on-board video recording make this special edition a real power quad!
Features
• UniBell 1202.5 Motors (8000kv 2s oder 6400kv 3s) – Powerful and smoothly
• Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo compatible
• Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
• Camera Angle adjustable
• Diamond VTX power switchable 25mw~200mw + Video Recording
• Smartaudio ready , change VTX bands, powers, channels via OSD
• Receiver option : FrSky, FlySky, PNP
• Compatible both for 2s-3s Lipo/LIHV
Specifications
• Item Name: LarvaX MicroSquad Power Edition 2-3S 2.5inch Brushless FPV drone
• Wheelbase: 100mm
• Size: 88mm*88mm*45mm (without propellers)
• Weight: 47g (without battery)
• Recommended Battery: 3S 520mah 2S 520mah
Motors
• Motor: MicroSquad UniBell 1202.5
• KV options: 8000kv (2s) / 6400kv (3s)
• Configuration:9N12P
• Stator Diamter:12mm
• Stator Length:2.5mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.*Len):Φ15mm*15mm
• Weight(g): 4.4g
Flight controller
• (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
• (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
• (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 2-4S battery input (DC 7-17V)
• Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 ready
• Frsky version Built-in SPI Frsky receiver with telemetry (D8/D16 switchable)
• Flysky version Built-in SPI Flysky receiver with telemetry (AFHDS/AFHDS2A switchable)
• PNP (no RX version need to add external Receiver)
• Built-in Betaflight OSD (SPI Control)
• Built-in Current meter Max 70A
• Current meter scale set to 470
• Built-in 5V 1A BEC
• Built-in voltage detection
Onboard 4in1 ESC
• MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HV (7v/17v)
• Current: 10A continuous peak 12A (5 seconds)
• Support BLHeliSuite programmable
• Factory firmware: F_H_40_REV16_5.HEX
• Default protocol: DSHOT600
Diamond VTX DVR with FPV Video Recording
• Output power: 25~200mw switchable
• Frequency: 40CH
• Input voltage: 3.3V 5.5V
• Current consumption: 250mA~510mA (type)
• Antenna: RG178 antenna
• U.FL interface
• Frequency: 5.8GHz 5bands 40 channels
• With Raceband
• Smartaudio ready
• Weight: 3g without antenna
• Video Output Size: VGA (640×480)
• Video Output format: NTSC
• Record video size : 1280×720 @25FPS
• TF Card support: Max.32G
• Interface: JST SH1.0 3pin for Camera
• JST SH1.0 5pin
• Compress Format: AVI
Runcam NANO2
• Model: Nano 2
• Image Sensor: 1/3″ CMOS
• Horizontal Resolution: 700TVL
• Lens: 2.1mm(M8) FOV 155°
• Signal System: NTSC / PAL
• S/N Ratio: >50dB
• Electronic Shutter Speed: Auto
• Auto Gain Control (AGC): Auto
• Min. Illumination: 0.01Lux@1.2F
• D-WDR: Auto
• Day/Night: Color
• Power: DC 3-5.5V
• Current : 110mA@5V 120mA@3.3V
• Housing Material: ABS
• Net Weight: 3.2g
• Dimensions: L14mm*W14mm*H16mm
Props
• 2,5″ HQ 3-Blade
Included
• 1x LarvaX – Squad Power Edition | 2-3S 2.5″ DVR (DIY BUILD KIT)
Required:
• Transmitter
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad 2-3s 520mAh HV Lipo with a high C rate
* Attention
The video transmitter may spark on non-harmonized frequencies which may not be used in Germany and the EU. § 55 of the Telecommunications Act (TKG) prescribes the following frequencies for use: 5725 to 5875 MHz. The device may only be operated in this frequency range with a power of 25mW. The use of unauthorized frequencies and higher performance constitutes a misdemeanor. In the delivery state the device is in DE and EU allowed 5740 MHz (band F, channel 1) with a power of 25mW.
Weight | 0.1 kg |
---|---|
Dimensions | 5 × 2 × 1 cm |
Build-In Empfänger | FrSky, FlySky, PNP |
KV | 6400kv – 3s, 8000kv -2s |
Be the first to review “LarvaX – Squad Power Edition (DIY BUILD KIT)” Cancel reply
You must be logged in to post a review.
Related products
Micro Brushless
Microsquad BlueSkill 65mm X2 F4 Brushless 1S (19kkv) with built-in Receiver (DIY BUILD KIT)
keine Ausweisung der Mehrwertsteuer gemäß § 19 UStG + Versandkosten
Micro Brushless
Microsquad Watermelon 75mm X2 F4 Brushless 2S with built-in Receiver (DIY BUILD KIT)
keine Ausweisung der Mehrwertsteuer gemäß § 19 UStG + Versandkosten
Micro Brushless
keine Ausweisung der Mehrwertsteuer gemäß § 19 UStG + Versandkosten
Reviews
There are no reviews yet.