Microsquad Naoki78 – 78mm 2-3s Pusher Quad (DIY BUILD KIT)

Microsquad Naoki78 – 78mm 2-3s Pusher Quad (DIY BUILD KIT)

The Microsquad Naoki78, a light (48g dry) but extremely stable 2-3s Whoop / Quad that can withstand a lot! Naoki78 comes with the Crazybee V3 Pro AIO flight controller, 12A ESC (each), OVX303 OpenVTX – for a great FPV feeling, super powerful 1202.5(!) UniBell motors with 8000kv, the Microsquad V2 4-blade props and the Microsquad Naoki78 frame (carbon and Polycarbon Prop Guards – super stiff!). The new Microsquad UniBell engines now with an improved bell and even better performance and power!

Features
• 48g (dry) 2-3s 78mm Brushless FPV Quad
• Carbon frame with Polycarbonat Propeller Guards
• UniBell 1202.5 Motoren (8000kv) mit 4-Blatt Gemfan Props – Powerful and smoothly
• Crazybee V3 Pro F4 AIO Flight controller 2-3s Lipo kompatibel
• Betaflight OSD support, easy to get RSSI, Voltage, current on your goggles
• Camera Angle adjustable
• OVX303 OpenVTX – Smartaudio ready, change VTX bands, powers, channels via OSD
• Receiver option : ELRS, FrSky, FlySky, PNP
• Compatible for 2-3s Lipo / LIHV

Specifications
• Item Name: Microsquad Naoki78 – 78mm 2-3s Pusher FPV Quad
• Wheelbase: 78mm
• Weight: ca. 48g (without battery)
• Recommended Battery: 2S 520mah oder 3s 380mah / 3s 530mah

Flight Control
• (ELRS version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX with Fyujon VTX/ELRS
• (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
• (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
• (PNP – No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 2-4S battery input (DC 7-17V)
• Built-in 10A (each) Blheli_S 4in1 ESC Dshot600 ready
• Frsky version Built-in SPI Frsky receiver with telemetry (D8/D16 switchable)
• Flysky version Built-in SPI Flysky receiver with telemetry (AFHDS/AFHDS2A switchable)
• PNP (no RX version need to add external Receiver)
• Built-in Betaflight OSD (SPI Control)
• Built-in Current meter Max 70A
• Current meter scale set to 470
• Built-in 5V 1A BEC
• Built-in voltage detection

Onboard 4in1 ESC
• MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HV (7v/17v)
• Current: 10A continuous peak 12A (5 seconds)
• Support BLHeliSuite programmable
• Factory firmware: F_H_40_REV16_5.HEX
• Default protocol: DSHOT600

Runcam NANO2
• Model: Nano 2
• Image Sensor: 1/3″ CMOS
• Horizontal Resolution: 700TVL
• Lens: 2.1mm(M8) FOV 155°
• Signal System: NTSC / PAL
• S/N Ratio: >50dB
• Electronic Shutter Speed: Auto
• Auto Gain Control (AGC): Auto
• Min. Illumination: 0.01Lux@1.2F
• D-WDR: Auto
• Day/Night: Color
• Power: DC 3-5.5V
• Current : 110mA@5V 120mA@3.3V
• Housing Material: ABS
• Net Weight: 3.2g
• Dimensions: L14mm*W14mm*H16mm

OVX303 OpenVTX Whoop Stack Power VTX
• TinyWhoop Stack VTx with 25-300mW* and 48 Channel (incl. Raceband)
• OpenVTX firmware
• Input Voltage: 5V
• Current: <650mA (300mw)
• Frequency: 5,8GHz 6 Band 48 Channel incl. Raceband
• UFL Antenna
• SmartAudio support
• Weight: ca. 1.5g (without Antenna)

Motors
• Motor: MicroSquad UniBell 1202.5
• KV Optionen: 8000kv
• Configuration:9N12P
• Stator Diamter:12mm
• Stator Length:2.5mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.*Len):Φ15mm*15mm
• Weight(g): 4.4g

Props
• Microsquad V2 40mm 4-Blatt – 1.5mm 

Weight (without battery) : 48g
Weight (with battery) : 77g (with GNB 2s HV 520mah Lipo)

Included
• 1 x Microsquad Naoki78 (DIY BUILD KIT)
• 1 x Screwdriver und Proptool

Required:
• Transmitter
• The delivery does NOT contain Lipo! We recommend lightweight Microsquad 2-3S 380-550mAh HV Lipo with a high C rate

* Attention
The video transmitter may spark on non-harmonized frequencies which may not be used in Germany and the EU. § 55 of the Telecommunications Act (TKG) prescribes the following frequencies for use: 5725 to 5875 MHz. The device may only be operated in this frequency range with a power of 25mW. The use of unauthorized frequencies and higher performance constitutes a misdemeanor. In the delivery state the device is in DE and EU allowed 5740 MHz (band F, channel 1) with a power of 25mW.