{"id":52383,"date":"2022-05-23T15:14:12","date_gmt":"2022-05-23T13:14:12","guid":{"rendered":"https:\/\/micro-squad.com\/?post_type=product&p=52383"},"modified":"2022-05-23T15:21:29","modified_gmt":"2022-05-23T13:21:29","slug":"crux3-toothpick-11-5kkv-1s-x12-edition-1s-3-zoll-diy-build-kit","status":"publish","type":"product","link":"https:\/\/micro-squad.com\/en\/product\/crux3-toothpick-11-5kkv-1s-x12-edition-1s-3-zoll-diy-build-kit\/","title":{"rendered":"Crux3 Toothpick 11.5kkv 1s \u2013 X12 Edition | 1s 3 Zoll (DIY BUILD KIT)"},"content":{"rendered":"

<\/span><\/div>\n

\n<\/span><\/p>\n

Crux3 Toothpick 11.5kkv 1s \u2013 X12 Edition | 1s 3 Zoll (DIY BUILD KIT)<\/strong><\/p>\n

The popular Crux3 Toothpick – Squad Edition: now as a special 1s 11500kv version with the new X12 5in1 AIO and super powerful 1202.5 UniBell motors. The X12 Edition, now with the new X12 5in1 AIO flight controller, which is equipped with OPENVTX (up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD! It comes with SPI ELRS receiver (support ELRS TX module 2.x firmware), and also other RX options like SPI Frsky (support Frsky D8\/D16 , REDPINE and SFHSS). In addition, the KIT has been optimized again and makes this special edition even lighter (35g dry!) \u200b\u200b- a real 3″ ultra-light power quad!<\/p>\n

Features
\n<\/strong>\u2022 35g (dry) 1s Toothpick brushless Quad
\n\u2022 UniBell 1202.5 Motoren (11500kv 1s) mit 2-Blatt 3″ Props \u2013 Powerful and smoothly
\n\u2022 X12 F4 5in1 AIO Flight controller
\n\u2022 Caddx Ant 1200TVL FPV Kamera
\n\u2022 Betaflight OSD support ,easy to get RSSI, Voltage ,current on your goggles
\n\u2022 Camera Angle adjustable
\n\u2022 Smartaudio ready, change VTX bands, powers, channels via OSD
\n\u2022 Receiver option : ELRS, FrSky, PNP
\n\u2022 Compatible both for 1s Lipo\/LIHV<\/p>\n

Specifications<\/strong>
\n\u2022 <\/span>Item Name: Crux3 Toothpick 11.5kkv 1s \u2013 X12 Edition (DIY BUILD KIT)
\n\u2022 <\/span>Wheelbase: 115mm
\n\u2022 <\/span>Size: 97mmx97mmx35mm(without propellers)
\n\u2022 <\/span>Gewicht: ca. 35g (without battery)
\n\u2022 <\/span>Recommended Battery: 1s 450mah \/ 650mah \/ 660mah \/ 720mah battery<\/p>\n

\n

Motoren<\/strong>
\n\u2022 SCHUBKRAFT UniBell <\/span>1202.5 KV11500<\/span>
\n\u2022 Configuration: 9N12P
\n\u2022 Stator Diamter: 12mm
\n\u2022 Stator Length: 2.5mm
\n\u2022 Shaft Diameter: \u03a61.5mm
\n\u2022 Motor Dimension(Dia.*Len): \u03a614mm*14.5mm
\n\u2022 Weight(g): 4.4g
\n\u2022 No.of Cells(Lipo): 1S
\n<\/span><\/p>\n

Flugcontroller
\n<\/strong>\u2022 <\/i>Flugcontroller: <\/i><\/strong>X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
\n\u2022 Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
\n\u2022 Power supply: 1-2S battery input (DC 2.9V-8.7V)
\n\u2022 Built-in 12A(each) Blheli_S 4in1 ESC
\n\u2022 Built-in Betaflight OSD(SPI Control)
\n\u2022 Built-in 5.8G OpenVTX 0mw~400mw
\n\u2022 Built-in ExpressLRS 2.4G,Frsky D8\/D16
\n\u2022 Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470
\n\u2022 VTX antenna: U.FL
\n\u2022 Weight: 5.1g
\n\u2022 Support 1-2S Lipo\/ LIHV battery
\n\u2022 Size: 30mm*30mm*8mm (Mount hole size: 25.5mm*25.5mm)<\/p>\n

\u2022 Betaflight firmware target:
\nELRS Version: CRAZYBEEF4SX1280
\nFRSKY Version:CRAZYBEEF4FR
\nPNP Version:CRAZYBEEF4DX
\nLITE Version:CRAZYBEEF4SX1280<\/p>\n

ESC
\n<\/strong>\u2022 Power supply: 1-2S LiPo\/LiPo HV
\n\u2022 Current: 12A continuous peak 15A (3 seconds)
\n\u2022 Support BLHeliSuite programmable
\n\u2022 Factory firmware: Z_H_30_REV16_7.HEX
\n\u2022 Default protocol: DSHOT300
\n\u2022 Support Bluejay firmware: When use Blujay firmware with 48khz, should set startup power to 1100\/1200<\/span><\/p>\n

Receiver
\nOnboard ELRS V2.0 receiver Version<\/strong>
\n\u2022 Packet Rate option: 50Hz\/150Hz\/250Hz\/500Hz
\n\u2022 ExpressLRS Firmware version: V2.0
\n\u2022 RF Frequency: 2.4GHz
\n\u2022 Antenna : SMD antenna
\n\u2022 Telemetry output Power: <12dBm
\n\u2022 Receiver protocol: SPI ExpressLRS
\n\u2022 Compatible with ExpressLRS V2.0 TX Module
\n\u2022 Couldn\u2019t flash separately ExpressLRS firmware
\nOnboard Frsky SPI D8\/D16 receiver Version<\/strong>
\n\u2022 SPI BUS receiver
\n\u2022 CC2500 RF
\n\u2022 Compatible Non EU transmitter D8 model Channels: 8ch
\n\u2022 No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
\n\u2022 Support Frsky D8\/ D16 , Redpine , SFHSS<\/span><\/p>\n

Onboard 5.8g Open VTX<\/strong>
\n\u2022 Firmware version: OPENVTX
\n\u2022 Smartaudio v2.1
\n\u2022 PIT Mode support
\n\u2022 RCE Mode support
\n\u2022 Channels:48ch
\n\u2022 Transmitting Power: 0\/RCE\/25mw\/100mw\/400mw
\n\u2022 Power supply: DC 5V
\n\u2022 Current (5v): <650ma (400mw)
\n\u2022 Antenna connector: U.FL<\/p>\n

Caddx ANT 1200TVL Kamera (custom)<\/strong>
\n\u2022 Image Sensor: 1\/3\u2033 CMOS Sensor
\n\u2022 Horizontal Resolution: 1200 TVL
\n\u2022 TV System: NTSC or PAL
\n\u2022 IMAGE: 4:3
\n\u2022 Synchronization: Internal
\n\u2022 Electronic Shutter: PAL: 1\/50~100,000; NTSC: 1\/60~100,000
\n\u2022 S\/N Ratio : >52dB (AGC OFF)
\n\u2022 Video Output: CVBSLens: 1.8mm
\n\u2022 Min. Illumination: 0.001Lux@F1.2
\n\u2022 Auto Gain Control: YES
\n\u2022 BLC: YES
\n\u2022 WDR: Global WDR
\n\u2022 DNR: 3D DNR
\n\u2022 Dimensions: 14*14mm(with bracket to 19*19mm)
\n\u2022 Wide Power Input: DC 3.7-18V
\n\u2022 Work Temperature: -20\u2103~+60\u2103
\n\u2022 Weight: 2g (N.W.)<\/span><\/p>\n

Props
\n<\/strong>\u2022 <\/span>Gemfan 3018-2 (Center Thickness:5.5mmProp Diameter:76.5mm, Center Hole diameter:1.5mm)<\/p>\n

Included<\/strong>
\n\u2022 <\/span>1x Crux3 Toothpick 11.5kkv 1s \u2013 X12 Edition (DIY BUILD KIT)<\/p>\n<\/div>\n

\n

Required
\n<\/strong>\u2022 Transmitter
\n\u2022 The delivery does NOT contain Lipo!<\/strong> We recommend lightweight Microsquad 1s 300mAh Lipo with a high C rate<\/p>\n

* Attention<\/strong>
\nThe video transmitter may spark on non-harmonized frequencies which may not be used in Germany and the EU. \u00a7 55 of the Telecommunications Act (TKG) prescribes the following frequencies for use: 5725 to 5875 MHz. The device may only be operated in this frequency range with a power of 25mW. The use of unauthorized frequencies and higher performance constitutes a misdemeanor. In the delivery state the device is in DE and EU allowed 5740 MHz (band F, channel 1) with a power of 25mW.<\/p>\n<\/div>\n

<\/span><\/p>\n\t

\n\t\t\t\t\t\t\t\t
\n\t\t\t\"\"\t\t\t\t\t\t\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\n