{"id":49633,"date":"2022-02-02T16:20:37","date_gmt":"2022-02-02T15:20:37","guid":{"rendered":"https:\/\/micro-squad.com\/?post_type=product&p=49633"},"modified":"2022-05-20T11:59:19","modified_gmt":"2022-05-20T09:59:19","slug":"diamond-f4-aio-5-in-1-1s-build-in-rxvtx-flight-controller","status":"publish","type":"product","link":"https:\/\/micro-squad.com\/en\/product\/diamond-f4-aio-5-in-1-1s-build-in-rxvtx-flight-controller\/","title":{"rendered":"Diamond F4 AIO 5in1 1s Flight Controller build-in RX + Open VTX"},"content":{"rendered":"

<\/span><\/p>\n

\n<\/span><\/p>\n

Diamond F4 AIO 5in1 1s build-in RX + VTX Flight Controller<\/strong>
\n<\/span><\/p>\n

This flight controller is inspired from Pilot „Angry Don FPV“. Diamond F4 AIO 5-IN-1 Flight controller has a built-in Open VTX, ESC, OSD, and receiver – all on one triangle-shaped whoop board!<\/p>\n

The 3 corners fit 25.5mm whoop mounting spacing.<\/p>\n

Specs
\n<\/b>\u2022 <\/i>Flugcontroller:\u00a0<\/i><\/strong>Diamond F4 <\/strong>Firmware target: CrazybeeF4<\/em>
\n\u2022 Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)<\/span>
\n\u2022 Spannungseingang: 1S input (DC 2.9-4.35V)
\n\u2022 Built-in 5A (each) Blheli_S 4in1 ESC Dshot600 ready
\n\u2022 Built-in 5.8G OPEN VTX
\n\u2022 Built-in SPI ELRS V2.0\/ Frsky receiver
\n\u2022 Betaflight OSD (SPI Control)
\n\u2022 Built-in 5V 1A BEC
\n\u2022 weight: ca. 3,4g<\/p>\n

ESC
\n<\/strong>\u2022 MCU upgraded to EFM8BB21
\n\u2022 Power supply: 1S LiPo\/ LiPo HV
\n\u2022 Current: 5A continuous peak 6A (3 seconds)
\n\u2022 Support BLHeliSuite programmable
\n\u2022 Factory firmware: O_H_5_REV16_8.HEX
\n\u2022 Default protocol: DSHOT600<\/span><\/p>\n

Empf\u00e4nger
\nOnboard ELRS V2.0 receiver Version
\n<\/strong>\u2022 Packet Rate option: 50Hz\/150Hz\/250Hz\/500Hz
\n\u2022 ExpressLRS Firmware version: V2.0
\n\u2022 RF Frequency: 2.4GHz
\n\u2022 Antenna : Enameled copper wire antenna
\n\u2022 Telemetry output Power: <12dBm
\n\u2022 Receiver protocol: SPI ExpressLRS
\n\u2022 Compatible with ExpressLRS V2.0 TX Module
\n\u2022 Couldn\u2019t flash separately ExpressLRS firmware
\nOnboard Frsky SPI D8 receiver Version<\/strong>
\n\u2022 SPI BUS receiver Frsky D8 compatible
\n\u2022 Compatible Non EU transmitter D8 Channels: 8ch
\n\u2022 Failsafe support
\n\u2022 No ground interference (Transmitter and receiver 1 m from the ground): 200m~300m
\nOnboard Flysky SPI receiver Version<\/strong>
\n\u2022 SPI BUS receiver
\n\u2022 Protocol: AFHDS and AFHDS-2A Switchable
\n\u2022 Channels: 8ch (AFHDS) or 14ch (AFHDS-2A)
\n\u2022 No ground interference (Transmitter and receiver 1 m from the ground): 200~300m
\n\u2022 Failsafe support<\/span><\/p>\n

Onboard 5.8g Open VTX<\/strong>
\n\u2022 Firmware version: OPENVTX
\n\u2022 Smartaudio v2.1
\n\u2022 PIT Mode support
\n\u2022 RCE Mode support
\n\u2022 Channels:48ch
\n\u2022 Transmitting Power: 0\/RCE\/25mw\/100mw\/400mw
\n\u2022 Power supply: DC 5V
\n\u2022 Current (5v): <650ma (400mw)<\/p>\n

Included<\/strong>
\n1x DiamondF4 AIO 5in1 Flight Controller
\n2x Connecting Wire
\n4x Damping Balls
\n4x Screws<\/p>\n

<\/span><\/p>\n\t

\n\t\t\t\t\t\t\t\t
\n\t\t\t\"\"\t\t\t\t\t\t\n\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\n